Genuine OE
OE Full Engine Gasket Kit — Toyota 4Y-ECS
- CategoryFull Engine Overhaul Gasket Kit
- SystemEngine System Parts
- Applicable ModelToyota 8FGU25 / 8FGU30, 02-8FG25 / 42-8FG25, 7FG25 / 7FG30 (2.5T–3.0T LPG / gasoline)
- Inquiry StatusAvailable on Request
- OE Genuine
- Export Ready
- Application Matching
Product Description
Product references are used for identification purposes only.
This product is offered for overseas B2B inquiries only.
Full engine overhaul gasket kit for Toyota 4Y-ECS and 4Y forklift engines used in the 8FG / 7FG series LPG and gasoline internal combustion forklifts. Contains the cylinder head gasket, valve stem seals, intake and exhaust manifold gaskets, oil pan gasket, timing cover gasket, water pump gasket, and all crankshaft front and rear main seals. Supplied as a single sealed kit for mid-life engine rebuild programs typically triggered every 8,000–12,000 engine hours. Most common inquiry on scheduled bulk rebuild cycles for fleet operators in Africa, Russia, and the Middle East. Product references are used for identification purposes only — we are not an authorized dealer of Toyota.
Technical Specifications
- OE Reference
- JC-EG-240513 (internal) — cross-reference with your existing Toyota service number
- Kit Type
- Full engine overhaul gasket kit
- Head Gasket Type
- Multi-layer steel (MLS), 1.2 mm compressed thickness
- Bore Count
- 4 cylinders
- Cylinder Bore
- 91 mm (Toyota 4Y-ECS)
- Included Items
- Head gasket, valve stem seals, intake / exhaust manifold gaskets, oil pan gasket, timing cover gasket, water pump gasket, front / rear crankshaft main seals, oil filler cap gasket
- Seal Material
- NBR valve stem seals; FKM crankshaft seals; graphite composite oil pan gasket
- Head Bolt Torque Spec
- Consult Toyota 4Y-ECS service manual (not supplied with kit)
- Recommended Service Trigger
- 8,000–12,000 engine hours (mid-life rebuild)
- Packaging
- Sealed individual kit carton; 10 kits / master carton
- MOQ
- 1 kit (rush) / 20 kits (scheduled bulk)
- Lead Time
- Rush: 1–2 days regional / Normal: 3–7 days / Bulk: 15–30 days / Scheduled bulk: 45+ days
Compatibility
- Toyota 8FGU25 (2.5T, 4Y-ECS engine)
- Toyota 8FGU30 (3.0T, 4Y-ECS engine)
- Toyota 02-8FG25 (2.5T, 4Y engine)
- Toyota 42-8FG25 (2.5T, 4Y engine)
- Toyota 7FG25 (2.5T, 4Y engine)
- Toyota 7FG30 (3.0T, 4Y engine)
- Toyota 5FG25 (legacy 5K engine — partial kit overlap, consult before ordering)
Key Selling Points
- 01
Complete Overhaul Kit
All gaskets, seals, and O-rings required for a full engine rebuild in one sealed kit.
- 02
Multi-Layer Steel Head Gasket
MLS head gasket matched to Toyota 4Y-ECS cylinder head surface finish and bore spacing.
- 03
Exact Bore Alignment
Head gasket bores, coolant passages, and oil galleries aligned to Toyota 4Y-ECS block specification.
- 04
Scheduled Rebuild Friendly
Ideal for 8,000–12,000 hour mid-life engine rebuild programs on fleet operations.
- 05
Export Documentation
FOB / CIF / DDP terms supported. Bulk orders packaged for long-haul ocean freight.
- 06
Africa & Russia Route Ready
Regional inventory support for scheduled bulk rebuild cycles on African and Russian routes.
Typical Application Scenarios
-
Scheduled Mid-Life Rebuild Program
-
Fleet Engine Overhaul Cycle
-
Workshop Rebuild Bulk Supply
More From This System
This part is included in the Engine Repair Parts Package. View the full package to see related items grouped under one inquiry.
Send Your Inquiry with Key Information
To confirm this part for your forklift, please include the following in your inquiry message.
- 01 Forklift model
- 02 Serial number
- 03 OE part number (existing reference: JC-EG-240513)
- 04 Engine model (if applicable)
- 05 Quantity
- 06 Destination country
- 24h Response
- FOB / CIF / DDP
- No MOQ for Samples